Orion-system VCM-X/RNE Controller Manual de usuario descargar pdf (Pagina 65)

VCM-X / RNE STATUS

VCM-X / RNE Operator Interface SD

Alarm Status

Press <ALARMS>. The Unit Selection Screen will be displayed. Enter

the Unit ID of the controller you wish to search and press <ENTER>.

You must type in the number, even if it is “1”. Once communication is

established, the *00* at the top will disappear. Then

press <>.

The System Manager or Service Tool will search for any active alarms

on the unit and the following screen will appear:

VCM-X / RNE v1.00

NO ALARMS OR

ALARMS PRESENT

SCROLL DOWN TO VIEW

Line 2-3 NO ALARMS! OR ALARMS PRESENT

If alarms are present, select VCMX /RNE Alarms or

Module Alarms. Press

<> to scroll through all active

alarms.

The screens that follow will display one or more of the

following:

VCM-X ALARMS

NO SUPPLY AIR TEMP

NO OUTDOOR AIR TEMP

SPACE SENSOR FAILURE

RETURN SENSOR FAILURE

MODULE ALARM

MECH COOLING FAILURE

MECH HEATING FAILURE

FAN PROVING ALARM

DIRTY FILTER ALARM

EMERGENCY SHUTDOWN

LO SUPPLY AIR ALARM

HI SUPPLY AIR ALARM

LOW CONTROL TEMP

HIGH CONTROL TEMP

CO2 SENSOR FAILURE

BAD OUTDOOR AIR CFM

TITLE 24 ECONOMIZER AIR TEMP SENSOR FAIL

TITLE 24 ECONOMIZER DAMPER FAIL

TITLE 24 ECONO ECONOMIZING BUT SHOULDN’T

TITLE 24 ECONOMIZER EXCESS OUTDOOR AIR

TITLE 24 ECONO NOT ECONOMIZING WHEN IT

SHOULD

MODULE ALARMS

Head Pressure 1

Head Pressure 2

Full Digital 1

Full Digital 2

WSHP Module 1

WSHP Module 2

Press

<ENTER> to select the module. Press <> to

scroll through all active alarms.

For Alarm Deﬁ nitions, see the VCM-X Modular E-BUS

or the RNE Controller Technical Guide.

VCM-X / RNE Status Screens & Alarms

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 91 92

Comentarios a estos manuales

Sin comentarios

Orion-system VCM-X/RNE Controller Manual de usuario Pagina 65

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Orion-system VCM-X/RNE Controller