Orion-system PT-Link II BACnet3 Manual de usuario descargar pdf (Pagina 64)

Zone

8. FS-GUI REFERENCE GUIDE

PT-Link II BACnet3 Interface

8. FieldServer Graphical User Interface

Refer to the Figure 39 to navigate the FS-GUI.

Figure 38: The FS-GUI Main Screen

8.1 The FieldServer Graphical User

Interface (FS-GUI) with Conﬁ guration

Parameter Page Navigation Tree

Open your web browser, and type the IP Address of the PT-Link, which

is <192.168.1.24>, and press <ENTER>. The FS-GUI Conﬁ guration

Parameter Page will launch. See Figure 38.

Figure 39: The Navigation Tree

About

About allows you to check the current ﬁ rmware of the Field Server

gateway plus version identiﬁ cation of the interface and skin, plus contact

information. Skin is either the default FieldServer template or a speciﬁ c

template speciﬁ ed by the user.

Setup

Setup includes File Transfer, Network Settings, and Passwords.

File Transfer—Select “File Transfer” to upload ﬁ les to the FS

gateway, including conﬁ guration ﬁ les, ﬁ rmware, upgrades, and

more. Information regarding File Transfers can be found on page 13.

Network Settings—Select “Network Settings” to access and

modify network connection. See page 65 for further information.

Passwords—There are 2 levels of passwords that can be set, Admin

and User. See pages 65 and 66 for further information.

View

View includes Connections, Data Arrays, Nodes, and Map Descriptors.

Connections—This screen supplies information on communica-

tion between the FS and remote devices. A number of aspect screens

are available including settings, info stats, and error stats. The infor-

mation on these screens cannot be changed and is for viewing only.

Data Arrays—The Data Array Screens can be used to view the

values in data arrays. The values can be changed by clicking the

<Enable Data Editing> button. You can then edit setpoints by

typing the new value and pressing <ENTER>. Note that if values

are being written into the array by a driver, then any modiﬁ cations

made by grid editing will be overridden.

Nodes—On the Nodes Screens, information about the remote device

on each connection can be viewed. A number of aspect screens are

available, including settings, status, info stats, and error stats. The in-

formation on these screens cannot be changed and is for viewing only.

Map Descriptors—On the Map Descriptors Screens, informa-

tion on each individual Map Descriptor can be viewed. A number

of aspect screens are available, including settings, status, info stats,

and error stats. The information on these screens cannot be changed

and is for viewing only.

User Messages

The user message screens display FS messages generated by drivers

and the operating system.

Error Screen—User messages on this screen usually indicate

some problem with the conﬁ guration or communication and should

be attended to.

Info Screen—User messages of an informational type will be

displayed on the this screen and no user action is usually required.

Driver Screen—Messages generated by protocol drivers will be

displayed on this screen. These messages convey protocol speciﬁ c

information that can be useful for ﬁ eld integration purposes.

Combined Screen—This screen contains all messages chronologi-

cally from all the above message screens.

Home or Root

The root of the navigation tree includes Status, Settings, and Info Stats.

Status allows you to check the status of the PT-Link gateway, including

the conﬁ guration code, version, memory, gateway type, and more. Under

Settings, you can access important network information. The name of

the root—Wattmaster MSTP v1.04i—is completely user deﬁ nable. The

<Home> button is found at the left bottom of the FS-GUI Main Screen.

Press this button to return to FS-GUI Main Screen.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 70 71 72

Comentarios a estos manuales

Sin comentarios

Orion-system PT-Link II BACnet3 Manual de usuario Pagina 64

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Orion-system PT-Link II BACnet3