Orion-system PT-Link II BACnet3 Manual de usuario descargar pdf (Pagina 15)

PT-Link II BACnet3 Interface

3. PT-LINK CONFIGURATION

10.) In the File Transfer Window under Update Conﬁ guration, click

<Choose Files> or <Browse>and locate the conﬁ g.csv ﬁ le you just

saved. Then click <Submit>. See Figure 19. Wait until the message,

“Conﬁ guration update complete” appears and then click the <System

Restart> button at the bottom of the File Transfer Window to activate

the new conﬁ guration ﬁ le.

3.4 Changing the Conﬁ g.csv File

Figure 19: Update Conﬁ guration

NOTE: The following ﬁ les can also be udpated in File Transfer Window:

Firmware Files: The FieldServer Firmware contains the application

program commonly referred to as the DCC or the PCC. This program

contains the protocol drivers applicable to the application and the Field-

Server Operating System Kernel. A Firmware update is only required

when updated ﬁ les are received from FieldServer support. Firmware

ﬁ les have a *.bin extension. The procedure for updating these is the

same as for the conﬁ guration ﬁ les, but the update needs to be made in

the Firmware Tab.

General (Other) Files: Other ﬁ les that can be updated include the FS-

GUI image and other ﬁ les described in driver manuals. The procedure for

updating these is the same as for the conﬁ guration ﬁ les, but the update

needs to be made in the General Tab.

Figure 20: Navigation Window - View Data Arrays

3.4.1 Verifying Communications

1. ) In the Navigation Window on the left of the FS-GUI Main Screen,

click

<View> and then click <Data Arrays>. See Figure 20.

2. ) Click on the Controller name. In this case, it is DA_C160_I0, a

VCM-X Controller. The Controller’s Data Array Table will display.

See Figure 21.

Figure 21: VCM-X Data Array Table

3 ) You can now cross reference the values shown in Figure 21 with

the listed parameter names in the appropriate Data Array Table for your

controller type. These tables can be found on pages 28-31.

3.4.2 FS-GUI Reference Guide

An FS-GUI Reference Guide can be found in Section 8, page 64.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 71 72

Sin comentarios

Orion-system PT-Link II BACnet3 Manual de usuario Pagina 15