Orion-system PT-Link II BACnet3 Manual de usuario descargar pdf (Pagina 13)

PT-Link II BACnet3 Interface

3. PT-LINK CONFIGURATION

3.4 Changing the Conﬁ g.csv File

Figure 11: The FS-GUI Main Screen

NOTE: You may need Administration rights to perform this

function. See the Password Section, page 65.

1.) Open your web browser, and type the IP Address of the PT-Link,

which defaults to <192.168.1.24>, and press <ENTER>. The GUI

will launch. See Figure 11.

2.) In the Navigation Window on the left of the FS-GUI Screen, click

<Setup> and then click <File Transfer>. See Figure 12.

Figure 12: Navigation Window - File Transfer

3.) Refer to the File Transfer Window below (Figure 13). In the Con-

ﬁ guration Tab, under Retrieve, click the conﬁ g.csv ﬁ le in order to save

it to a destination and then open it.

Figure 13: File Transfer - Conﬁ guration Tab

4.) Open the conﬁ g.csv ﬁ le in Notepad. See Figure 14.

WARNING: Only edit the conﬁ g.csv ﬁ le using Notepad. DO

NOT use Excel. Using Excel to edit the conﬁ g.csv ﬁ le will

corrupt its contents!

Figure 14: Conﬁ g.csv File

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 71 72

Sin comentarios

Orion-system PT-Link II BACnet3 Manual de usuario Pagina 13