Orion-system VCM-X Modular E-BUS Manual de usuario descargar pdf (Pagina 22)

Zone

INSTALLATION & WIRING

VCM-X Modular E-BUS Controller Technical Guide

Figure 19: OE275-01 – Suction Pressure Transducer Wiring (Units With Copeland Digital Scroll™

Compressors)

Suction Pressure Transducer With

Copeland Digital Scroll™ Compressor

For applications that use a Copeland Digital Scroll™ Compressor, the

OE275-01 Suction Pressure Transducer wires directly to the Copeland

Digital Scroll™ Compressor Controller supplied by the compressor

manufacturer. See Figure 19 below for wiring details.

In this application, the Suction Pressure Transducer connects to the

Copeland Digital Scroll™ Compressor with a prefabricated cable similar

to the one used in the previous application. The signal conditioning is

controlled by the Copeland Digital Scroll™ Compressor Controller.

This cable also has a 3-pin Packard mating connector for attachment to

the sensor on one end and has 3 color-coded stripped wires on the other

end. The stripped wire ends can be spliced to other wires to extend the

wiring when required to connect the Copeland Digital Scroll™ Com-

pressor Controller.

Suction Pressure Transducer Wiring

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 87 88

Sin comentarios

Orion-system VCM-X Modular E-BUS Manual de usuario Pagina 22