Orion-system VAV II Controller v.1 Manual de usuario descargar pdf (Pagina 50)

Zone

MUA II CONTROLLER STATUS

VAV/CAV/MUA Operator Interface SD

MUA II Controller Status Screen Index

Status Screen Instructions

From any menu screen, press <STATUS>. The Unit Selection Screen,

shown below, will appear requesting that you enter the unit ID number.

Unit Selection*00*

Enter Unit ID#

Selected ID#: XXXX

Enter the correct unit ID number of the Unit Controller you want to view

Status for and press

<ENTER>. Once communication is established,

the *00* message will go away. Then

press <>. You will then see

Status Screen #1. Press

<ENTER> to save entered data and press <>

to scroll through the screens.

NOTE: If the *00* remains, it indicates a communication failure

to the controller.

MUA II Status Screen Index

Status Screen #1 HVAC Mode

Status Screen #2 Current Supply Air Temperature,

and Active Supply Air Temperature

Setpoint

Status Screen #3 Current Outdoor Air Temperature

and Cooling and Heating Setpoints

Status Screen #4 Current Dewpoint Temperature,

Dewpoint Setpoint and Outdoor Air

Humidity

Status Screen #5 Current Enthalpy, Enthalpy Setpoint,

and Enthalpy Deadband

Status Screen #6 Current Space Temperature and

Reset Humidity Setpoint

Status Screen #7 MODGAS Output Percentage &

MHGRV Output Percentage

Status Screens #8-28 Supply Fan and Other Relays

Status Screen #29 No Alarms! or Alarms Present

Status Screen #30 No Supply Temperature, No Outdoor

Air Temperature, No Outdoor Air

Humidity

Status Screen #31 Fan Proving, Low SAT, High SAT

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 79 80

Sin comentarios

Orion-system VAV II Controller v.1 Manual de usuario Pagina 50