Orion-system SA Controller Manual de usuario descargar pdf (Pagina 51)

SA Controller Operator Interface

Programming

VAV/Zone Controller Setpoint Screens

Setpoint Screen #17 - Sensor Calibration for

Space Temp and Supply Air Temp

Sensor Calibration

SPC: XXX.Xº XXX.Xº

SAT: XXX.Xº XXX.Xº

[SAT Only if Sensor]

The Thermistor Type III sensor readings can be calibrated. Enter a

Positive value to increase a reading and a Negative value to decrease

a reading.

Note: The Supply Air Temperature calibration offset only oper-

ates on the reading when the VAV/Zone Controller has

its own Supply Air Temperature sensor installed on the

AUX2 input. If the supply temperature is received from

a global broadcast, you will need to go to the air handler

to calibrate the temperature reading.

Description Minimum Default Maximum

SPC (Space Temp) -100ºF 0ºF +100ºF

SAT (Supply Air) -100ºF 0ºF +100ºF

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 67 68

Sin comentarios

Orion-system SA Controller Manual de usuario Pagina 51