Orion-system Lead Controller Manual de usuario descargar pdf (Pagina 19)

Lead/Lag Controller Technical Guide

Section 6: Conﬁ guring Relays

Lead/Lag Relays

The Relays Window is located in the upper right of the Lead/Lag

Controller Status Screens (Figures 8 & 9, pages 11 & 12). There

are 8 Relays. See Figure 23 for the Lead/Lag Relays Window com-

ponent summary and the pages that follow for details. See Figure

24 for the 2 Lead/1 Lag Relays Window component summary and

the pages that follow for details.

Figure 23: Lead/Lag Relays Window

Components and Navigation

Right or left-click on any of the Relay ﬁ elds

to access the description entry box to add or

change the name of the Relay.

Left-click on this Status box to conﬁ gure the

Relays.

Right-click to override the Relay.

The bell will light up to indicate that an alarm

is on.

Amount of time in hours and minutes that the

relay has been energized.

Renaming Relays

To give the Relay a new name, click on the blue highlighted Relay

# ﬁ eld and the Relay Data Entry Dialog Box will open (Figure 25).

Once you have typed in a new description, press <ENTER> to save.

Figure 25: Relay Data Entry Dialog Box

Figure 24: 2 Lead/1 Lag Relays Window

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 55 56

Sin comentarios

Orion-system Lead Controller Manual de usuario Pagina 19