Orion-system PT-Link-LON Manual de usuario Pagina 18

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 40
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 17
PT-Link-LON
®
Technical Guide
PT-Link Interface
18
Appendix B
External Interface Files (XIF Files)
At start-up the PT-Link-LON creates an external interface le (XIF)
called fServer.xif based on the information contained in the PT-Link-
LON’s con guration le (con g.csv). The PT-Link-LON’s con guration
can be changed by uploading and editing the con g.csv le; therefore,
the XIF le must be obtained by uploading it from the PT-Link-LON.
The recommended procedure for obtaining the XIF le for the PT-Link-
LON is to upload it. Remember that this XIF le will change whenever
the con guration le has been changed and downloaded and the PT-
Link-LON restarted. The following are the steps to extract the external
interface le (XIF) from the PT-Link-LON:
1.) Start RUINET application.
2.) Select Fieldserver option “1” (this step may be skipped
when application auto detects PT Link).
3.) In the Main Menu select “A” – Data Array Overview.
4.) You should see 2 array items that are labeled wattmstr-
dump and wattmstr-stats. Ignore these.
5.) You should see 2 additional arrays for the controller
connected.
Example: DA_C162_I0 and DA_C162_I0b.
5.1.) The “b” at the end of the Data Array Name indicates
that it is a mirror array. You can ignore these.
5.2) Verify that your controller is visible or the XIF will not
be generated.
6.) After connection has been veri ed, you can
now exit to the Main Menu using the escape key.
7.) Type “U” – Upload Con guration.
8.) Type “O” to select other les.
9.) If prompted, press any key to continue.
10.) Type “R” – Remote Filename.
11.) Type “fserver.xif”
12. You should now see the name fserver.xif in the column to
the right.
13. Type “U” to upload the XIF le.
14. Once nished you will have an .xif le available in the
same directory as the RUINET executable le you were
running from.
WARNING: For easier con guration, set the unit address to 1.
Vista de pagina 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Comentarios a estos manuales

Sin comentarios