Orion-system PT-Link II LON Manual de usuario descargar pdf (Pagina 18)

PT-Link II LON

Technical Guide

PT-Link II Interface

Updating the PT-Link II Controller

13.) The Application ID should be SS1035 and the Application Version

should match the software version you will be updating to.

14.) In the HEX File ﬁ eld, enter the path and name of the HEX ﬁ le you

downloaded and/or copied to your hard drive. Use the Browse button

(...) to the right of the ﬁ eld if you need help in locating the ﬁ le.

15.) Now, cycle power to the PT-Link II once again and within 5

seconds click on the

<Program HEX> button (shown above). If suc-

cessful, you should see the Progress Application HEX bar showing the

progress percentage.

16.) When the bar shows 100% completed, verify the PT-Link II’s

software is running by observing the Timer LED blinking.

17.) Verify the PT-Link II’s Application Version by once again cycling

power to the PT-Link II and within 5 seconds clicking the

button.

18.) Verify all ﬁ elds are correct in the information below the

<Get

Info>

button and under “Finalization Data.” The “Int Flash Length”

and “Checksum” values should match the values provided with the

software sheet.

Revised 1/14/10

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 59 60

Sin comentarios

Orion-system PT-Link II LON Manual de usuario Pagina 18