Orion-system PT-Link II BACnet2 Manual de usuario descargar pdf (Pagina 7)

PT-Link II Interface

PT-Link II BACnet

Technical Guide

4.) As shown in Figure 6, click <Properties> in the lower

left of the window. The Local Area Connection Properties

Window will appear.

5). As shown in Figure 7, in the Connection Items list box,

be sure the Internet Protocol (TCP/IP) is checked. Select the

Internet Protocol (TCP/IP) item to highlight it and then click

<Properties>. The Internet Protocol Properties Window will

appear.

IP Address Conﬁ guration

Computer IP Address Set-up for Windows

NT & XP

1.) Click <start>; then click <Control Panel>.

2.) Double-click on the Network Connections icon.

The Network Connections Window will appear (Figure 5).

NOTE: If any wireless connections are listed, disable them

by right-clicking the connection and selecting

<Disable>.

3.) In the Network Connections Window, double-click the

Local Area Connections entry. The Local Area Connection

Status Window will appear (Figure 6).

Figure 5: Network Connections Window

Figure 6: Local Area Connection Status Window

Figure 7: Local Area Connection Properties Window

Computer IP Address Set-up for

Windows XP, Vista, and 7

In order for the PT-Link II to communicate properly, it is imperative to set

the IP address of both the PT-Link II as well as the computer to be within

the same netmask. You need to change the IP address on your computer.

The following instructions will explain how to conﬁ gure the IP address

for Microsoft

Windows XP, Vista, and 7 operating systems.

1 2 3 4 5 6 7 8 9 10 11 12 ... 59 60

Sin comentarios

Orion-system PT-Link II BACnet2 Manual de usuario Pagina 7