Orion-system GBD-X Controller Manual de usuario descargar pdf (Pagina 8)

24VAC

GND

Available Inputs

For Connection of

Space Temperature

Sensors. See Page

4 For Detailed

Space Temperature

Sensor Wiring

Communications Wire

Must Be 2 Conductor

Twisted Pair With

Shield, Belden #82760

Or Equivalent.

All Wiring Must Be

Straight Through,

R To R, T To T And

SHLD To SHLD.

Line Voltage

24 VAC Transformer

8 VA Minimum

FILENAME

DATE:

B. CREWS

DESCRIPTION:

PAGE

DRAWN BY:

OE332-23- GBDX Controller

JOB NAME

OE332-23-GBDX-Wire1A.CDR

FILENAME

JOB NAME

3of5

GBD-X Wiring

4.) All Wiring To Be In Accordance

With Local And National Electrical

Codes And Specifications.

3.) Set-up, Programming And

Monitoring Of The GBD-X

Controller Requires The Use Of A

Personal Computer And Prism

Software.

2.) 24 VAC Must Be Connected

So That All Ground Wires

Remain Common.

Notes:

1.) The GBD-X Can Either Be Used

With CO2 Sensors Or Space

Temperature Sensors But Not

Both On The Same GBD-X

Controller. Up to 2 GBD

Controllers Can Be Located On

Each Local Loop.

OE33 -2 -

GBD Device Wiring

When Used For Applications

2 3 GBDX

-X

Space Temperature Sensor

AI1

AI1 SET AI2 SET AI3 SET

AI4 SET AI5 SET AI7 SET

AI2

AI3

AI4

AI5

AI7

Connect The GBD-X

To The Same Local

Communications Loop

As The Controller

That Will Be

Receiving the GBD-X

Broadcast

10/21/10

1 2 3 4 5 6 7 8 9 10 11 12

Comentarios a estos manuales

Sin comentarios