Orion-system OE217-00 Manual de usuario descargar pdf

Form: ORION-OE217-01-DigitalRoomSensor-1C.doc Page 1 of 1

Description

The OE217 series of Touch Screen Digital Room Sensors

are used to sense Space Temperature only or Space

Temperature & Space Humidity. The OE217-00 model is

the Space Temperature Sensor only model and can be

used with the VCM-X Controller (OE332-23-VCMX) and

the VAV/Zone Controller (OE324-02). The OE217-01 is a

combination Space Temperature & Space Humidity

Sensor model and can only be used with the VCM-X

Controller.

Besides sensing Temperature & Humidity, the Digital

Room Sensors also provide these other useful features:

• User Friendly Graphical LCD Display with LED

Backlight

• Display the Current Space and Outdoor Air

Temperature

• Display the Current Space Humidity and Outdoor

Air Relative Humidity (OE217-01 Model Only)

• Display the current Zone Setpoint Temperature

• Equipped With Push Buttons for Changing the

Zone Setpoint Temperature

• Equipped With an Override Button for Forcing the

VAV/Zone Controller or VCM-X Controller into

Occupied Operation from Unoccupied Operation

•

Provides graphics to indicate the mode of operation

• Provides LEDs to indicate Schedule Override,

Button Push, and Alarms

Both sensors connect to the controllers using TSDRSC

modular cables of multiple lengths connected between the

controller and the sensor. The TSDRSC modular cables

should not run in conduit with other AC line voltage wiring

or with any conductors carrying highly inductive loads.

Mounting

The Digital Room Sensor is designed to be mounted to a vertical, 2” x 4” electrical box recessed in the wall. If the wall

cannot be penetrated, a plastic surface mount box such as those made by Wiremold

, may be used to mount the

sensor to the wall surface. The Sensor is mounted by removing the front cover and fastening the housing base to the

electrical box using the supplied (2) 6/32” x 1” machine screws. The Modular cable is then plugged into the phone jack

located on the circuit board that is mounted on the cover. The cover is then placed onto the housing base and the Allen

Screw on the bottom of the base is adjusted to hold the cover in place.

Technical Data OE217-00 & OE217-01 Digital Room Sensor

Sensor Element Type III Thermistor 10k ohm

@ 77 F Digital Sensing Device

Display 112 x 64 Monochrome Graphical LCD

w/LED Backlight

Sensor Reading

Range

40F to 120F

RH = 0-100%

Connection

RJ-45 Modular Female Jack

Ambient

Temperature

Limits

-40F to 180F

Weight

3.2 oz.

Accuracy

RH +/-2%, Temp +/- .5F

Three Year Warranty WattMaster reserves the right to change specifications without notice

OE217-00 & OE217-01

Digital Room Sensors

1 2 3 4 5 6 ... 37 38

Indice de contenidos

Pagina 1 - Digital Room Sensors

Form: ORION-OE217-01-DigitalRoomSensor-1C.doc Page 1 of 1 Description The OE217 series of Touch Screen Digital Room Sensors are used to sense Spac

Pagina 2 - TSDRSC-XX

Form: ORION-ModularRoomSensor-1F.doc Page 1 of 1 Description The patented design, OE21x-02 series Modular Room Sensor provides accurate sensing o

Pagina 3 - E-BUS Digital Room Sensors

Form: ORION-ModularCable-FMRSC-1B.doc Page 1 of 1 Description Description The FMRSC Cables are used to connect power and communica-tions between

Pagina 4 - E-BUS Digital Room Sensor

Form: ORION-StandardRoomSensor-1D.doc Page 1 of 1 Description The patented design, OE21x series Standard Room Sen-sor provides accurate sensing of

Pagina 5

FILENAMEDATE:B. CREWSDESCRIPTION:PAGEDRAWN BY:Duct Temperature Sensor1JOB NAME07/13/15G-DUCSENS1.CDROE230 & OE231Duct Temperature SensorsOE230 (6&

Pagina 6 - MS000248 - E-BUS Adapter Hub

4.)All Wiring To Be In Accordance WithLocal And National Electrical CodesAnd Specifications.3.)Gasket Must Be Installed Under CoverPlate To Provide Ra

Pagina 7

Form: Orion-OE265-15-A-EBUS-Horiz-OA-RH-Sensor-01A Page 1 of 1 Description The OE265-15-A E-BUS Horizontal Outdoor Air Temperature and Humid

Pagina 8

Form: Orion-OE265-16-EBUS-Vert-OA-RH-Sensor-01B Page 1 of 1 Description The OE265-16 E-BUS Vertical Outdoor Air Temperature and Humidity is

Pagina 9 - EBC-XXXF – EBC E-BUS Cables

Form: ORION-OE265-17-A-EBUS-Return-RH-Sensor-01A Page 1 of 1 Description The OE265-17-A E-BUS Return Air Temperature and Humidity is a combin

Pagina 10 - Modular Room Sensors

JOB NAMEFILE NAMEG-OE265-13B-OAHUMID-1F.PDFDATE: 08/25/11PAGEDESCRIPTIONOutside Air Humidity Sensor – 0-5 VDCDRAWN BY: B. CREWSNotes:1.) The Outsid

Pagina 11 - Modular Room Sensor Cable

JOB NAMEFILE NAMEPAGEDESCRIPTIONOE265-13 BAPIOutside Air Humidity Sensor – 0-5 VDCDRAWN BY: B. CREWS2 of 2Notes:1.) All Wiring To Be In Accordance

Pagina 12 - Standard Room Sensors

Form: ORION-ModularCable-TSDRSC-1A.doc Page 1 of 1 Description The TSDRSC Cables are used to connect power and communica-tions between the WattMa

Pagina 13 - Duct Temperature Sensors

JOB NAMEFILE NAMEG-OE265-14B-RAHUMID-1D.PDFDATE: 08/28/07PAGEDESCRIPTIONOE265-14 BAPIReturn Air Humidity Sensor – 0-5 VDCDRAWN BY: B. CREWSNotes:1.

Pagina 14 - Outside Air Sensor OE250

JOB NAMEFILE NAMEPAGEDESCRIPTIONReturn Air Humidity Sensor – 0-5 VDCDRAWN BY: B. CREWS2 of 2 RH Output % VDC55 ... 2.7560 ... 3.0065 .

Pagina 15

JOB NAMEFILE NAMEG-OE265-11-SPHUMID1D.PDFDATE: 08/02/07PAGEDESCRIPTIONOE265-11Space Humidity Sensor – 0-5 VDCDRAWN BY: B. CREWSNotes:1.) The senso

Pagina 16 - Mounting

JOB NAMEFILE NAMEG-OE265-11-SPHUMID1D.PDFDATE: 08/02/07PAGEDESCRIPTIONOE265-11Space Humidity Sensor – 0-5 VDCDRAWN BY: B. CREWS*Chart Notes:1. Fi

Pagina 17

Form: ORION-OE265-06-Humidistat-1C.doc Page 1 of 1DescriptionThe OE265-06 Wall Mounted Humidistatis used with the HVAC unit controller toinitiate deh

Pagina 18 - INCORRECT

Form: ORION-OE265-07-Humidistat-1B.doc Page 1 of 1DescriptionThe OE265-07 Duct MountedHumidistat is used with theHVAC unit controller to initiatedehum

Pagina 19 - RH/Voltage Chart

4.)AllWiringToBeInAccordanceWithLocalAndNationalElectricalCodesAndSpecifications.3.)GasketMustBeInstalledUnderCoverPlateToProvideRaintightSeal.Rainwat

Pagina 20 - Sensor to Duct

CONTROLSFILENAMEDATE: 01/03/05B. CREWSDESCRIPTION:PAGEDRAWN BY:G-OE233-W-TempSnsr1a.CDROE233 - Strap-On TemperatureSensor Kit Installation1JOB NAMEPla

Pagina 21

Notes:CONTROLSFILENAMEDATE:B. CREWSDESCRIPTION:PAGEDRAWN BY:Static Pressure Pickup Tube1JOB NAME05/21/00SPUTUBE1.CDROE290In Order To Obtain Accurate S

Pagina 22 - Right Side View

FILENAMEDATE:B. CREWSDESCRIPTION:PAGEDRAWN BY:Water Temperature Sensor Thermowell1JOB NAME07/09/04G-OE291-T-Well.CDROE291OE291 Thermowell AssemblyUsin

Pagina 23

Form: ORION-OE217-02-03-EBUS-DRS-1A.doc Page 1 of 1 Description The OE217 series of Touch Screen E-BUS Digital Room Sensors are used to sense Spa

Pagina 24 - Humidistat

General NotesFILENAMEDATE:B. CREWSDESCRIPTION:PAGEDRAWN BY:Pressure Sensor1JOB NAME2.)All Wiring To Be In Accordance With Local AndNational Electrical

Pagina 25 - OE265-07 – Duct Mounted

Notes:CONTROLSFILENAMEDATE:B. THRALLDESCRIPTION:PAGEDRAWN BY:Pressure Independent Velocity Sensor1JOB NAME2.)All Wiring To Be In Accordance With Local

Pagina 26 - AmbientLightSensor OE259

Form: ORION-OE258-6-BuildingPressureSensor-1B.docPage 1 of 1DescriptionThe OE258 Building Static Pressure Sen-sor is used to sense building pressure i

Pagina 27 - CONTROLS

Form: ORION-OE256-01-CO2Sensor-1C.doc Page 1 of 1 Description The OE256-01 Wall Mounted CO2 Sensor is used in conjunction with the VCM-X Control

Pagina 28 - SPUTUBE1.CDR

Form: ORION-OE256-02-DuctMtdCO2Sensor-1A.doc Page 1 of 1 Description The OE256-02 Duct Mounted CO2 Sensor is used in conjunction with the VCM-X C

Pagina 29 - OE291 Thermowell Assembly

Form: AAON-OE256-05—EBUS-CO2Sensor-1A.doc Page 1 of 1 Description The Wall Mounted E-BUS CO2 Sensor (Orion Part No. OE256-05; AAON Part No. V093

Pagina 30 - Airflow Sensor

Form: AAON-OE256-07-EBUS-DUCT-CO2-1B.doc Page 1 of 1 Description The E-BUS Duct Mounted E-BUS CO2 Sensor with Remote Pickup (Orion Part No. OE256

Pagina 31 - Side View

Form: ORION-OE275-01-SuctionPressureTransducer-1E.doc Page 1 of 1DescriptionThe OE275-01 Suction Pressure Trans-ducer is used to monitor the suction l

Pagina 32

Form: ORION-OE275-03-A-SuctionPressureSensorKit-wE-BUS-Adapter-1B.doc Page 1 of 1 Description The OE275-03-A Suction Pressure Sensor Kit wit

Pagina 33

Form: ORION-OE217-04-EBUS-DRS-1A.doc Page 1 of 1 Description The OE217-04 E-BUS Digital Room Space & Humidity Sensor is used to sense Space

Pagina 34

Form: ORION-BK000081-Sensor-Mounting-Plate-1A.doc Page 1 of 1 Description The BK00081 Sensor Mounting Plate is used, if necessary, to cover

Pagina 35

Form: AAON-MS000248-E-BUS-Adapter-1A.doc Page 1 of 1 Description The MS000248 E-BUS Adapter Hub is used to provide a connection point for

Pagina 36

Form: AAON-HZ-EBC-248-E-BUS-Adapter-1A.doc Page 1 of 1 Description The HZ-EBC-248 (AAON Part No. V17180) is comprised of the MS000248 E-BUS

Pagina 37

Form: ORION-OE365-15-EBA-A-E-BUS-Adapter-Board-1C.doc Page 1 of 1 Description The OE365-15-EBA-A E-BUS Adapter Board is used to provide a co

Pagina 38 - With E-BUS Adapter Board

Form: ORION-EBC-XXXF-E-BUS-Cable-1B.doc Page 1 of 1 Description The EBC E-BUS Cables are used to connect power and communications between the VCB

Modelos relacionados OE217-01

Comentarios a estos manuales

Sin comentarios

Orion-system OE217-00 Manual de usuario

Busca en linea o descarga Manual de usuario para Sensores Orion-system OE217-00. Orion System OE217-00 User Manual Manual de usuario

Indice de contenidos

Modelos relacionados OE217-01

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Orion-system OE217-00